I Hate This Street Twin Clutch!!!!
Thread Starter
Registered User
Joined: Mar 2000
Posts: 570
From: Las Vegas Nv.
I Hate This Street Twin Clutch!!!!
Good luck with trying to get your transmission in I hate this damn street twin clutch my car has been down for over a month now!!! I wish i would of just bought a Star stage III and been done with it. I cant get my f'in transmissin back in and im about to just take this damn thing to a shop and let them fight this mother *****er im about done with it this is the one thing that i have bought for my car that i wished i wouldnt of wasted my money on!!!!!! I have done over 20+ clutches on cars and this one is the biggest POS i have ever tried to install im about to just sell this thing and by a Star!!!
Steve
Steve
Registered User
Joined: Nov 1998
Posts: 762
From: Huntsville, Alabama
Well if you decide you want to chunk it for a Star Stage 3 Ceramic let me know. I have a brand new one that I installed on my car, but the motor is not complete yet. I would gladly swap... 
Jose
Jose
Thread Starter
Registered User
Joined: Mar 2000
Posts: 570
From: Las Vegas Nv.
If i knew that it would already be in the car!!! J/K I have no idea the transmission just stops going in and if you push on it you can bend the clutch discs all up so you just have to fight this SOB and im done fighting it on my back in the garage when its 106 outside here in vegas!!!!!! if you have anytips please shre them my wife is so pissed at me and this car its unreal and its because of this clutch I will tell you what for the amount of money this thing cost they give you the cheapest alignment tool money can find!!
Steve
J/K I have no idea the transmission just stops going in and if you push on it you can bend the clutch discs all up so you just have to fight this SOB and im done fighting it on my back in the garage when its 106 outside here in vegas!!!!!! if you have anytips please shre them my wife is so pissed at me and this car its unreal and its because of this clutch I will tell you what for the amount of money this thing cost they give you the cheapest alignment tool money can find!!Steve
Registered User
Joined: Nov 2002
Posts: 1,831
From: Middle Tennessee
Well, the disc has splines for the input shaft on the tranny right?
Assuming everything is lined up correctly, the only valid reason that I can think of for the tranny to not slide in and mate up would be either the input shaft needs to be rotated slightly to line up with the splines on the disc OR the clutch fork might be bumping on the throwout bearing?
I've only done a clutch in one car, but I remember having to rotate the tranny some to get it to line up with the disc.
Assuming everything is lined up correctly, the only valid reason that I can think of for the tranny to not slide in and mate up would be either the input shaft needs to be rotated slightly to line up with the splines on the disc OR the clutch fork might be bumping on the throwout bearing?
I've only done a clutch in one car, but I remember having to rotate the tranny some to get it to line up with the disc.
Thread
Thread Starter
Forum
Replies
Last Post
Ringmaster72
Parts For Sale
1
Mar 19, 2015 03:32 PM
