Just ordered a cam kit, doing the work myself. just wondering (kinda as motivation) how much power do you think she might be pulling when its all done??
here are the mods:

Cam- 221/227 duration .542"/.560", 114lsa
Pro-Magnum Rocker Arms
612 Valve Srings
138 Ultra Light Weight Chromoly Retainers
Pro Magnum lifters
391 Hardened Valve Locks
720H Hardened Pushrods
Cloyes True Double Roller
PCM tuned by http://www.pcmforless.com
Electric waterpump
Flowmaster 3' catback
SLP CAI
MSD wires
NGK tr6 plugs
de-screened and ported MAF
!tb bypass
1le elbow
160 stat

thanks alot hope all this work will put out some decent gains

 

How much hp is it making now and what cam is in it?

Rich Krause

 

i havent dynoed it yet, the mods i have listed are the only ones ive done. it is a m6 by the way
and the cam is a 221/227 duration .542"/.560", 114lsa comparable to the cc305. im just looking for a ballpark estimate. thanks

 

If the cam is the only change, and you currently have a stock cam, I'd guess you will gain 20-40rwhp. How much power will depend on what it's making now.

Rich Krause

 

I would say your not going to see any real gains till you put headers on the car

 

Combination Motorsports eh?

Thats the exact same kit I have coming... (looking outside for the brown truck...)

BTW, is that 221/227 not a 112LSA?

 

You should bolt up a set of headers when you do the install

 

TN-221XE 221/227 duration, .542"/.560", 114lsa $247.97

http://www.cmotorsports.com/engine/l...ft-design.html

 

i guess its time for headers then...there goes this weeks paycheck