LT1 Based Engine Tech 1993-1997 LT1/LT4 Engine Related

HOw much HP will this support

Old Sep 29, 2004 | 10:54 PM
  #1  
atljar's Avatar
Thread Starter
Registered User
 
Joined: Feb 2001
Posts: 3,068
From: Cincinnati, Ohio
HOw much HP will this support

255lph pump

50psi running through a single -06 (3/8) AN line?

Any formulas for AN flow rates vs HP? Only seen such figures for a carb setup.

Last edited by atljar; Sep 29, 2004 at 10:56 PM.
Old Sep 30, 2004 | 01:58 AM
  #2  
Spinner's Avatar
Registered User
 
Joined: Jul 2003
Posts: 2,945
From: Fort Benning, GA
Re: HOw much HP will this support

I'd figure on 650-700 fwhp, since a stocker can support ~450 and those flow 40-50% more with a good harness.
Old Sep 30, 2004 | 02:11 AM
  #3  
atljar's Avatar
Thread Starter
Registered User
 
Joined: Feb 2001
Posts: 3,068
From: Cincinnati, Ohio
Re: HOw much HP will this support

So you would figure the pump to be the limiter before the 6an line would be?
Old Sep 30, 2004 | 03:32 PM
  #4  
Spinner's Avatar
Registered User
 
Joined: Jul 2003
Posts: 2,945
From: Fort Benning, GA
Re: HOw much HP will this support

Originally Posted by atljar
So you would figure the pump to be the limiter before the 6an line would be?
Yeah. 6an on an LT1 rail will hold a lotsa power.
Old Sep 30, 2004 | 06:20 PM
  #5  
atljar's Avatar
Thread Starter
Registered User
 
Joined: Feb 2001
Posts: 3,068
From: Cincinnati, Ohio
Re: HOw much HP will this support

Cool, thanks for the responses This beast is going in, SOON :evil:
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
ducttape1975
Classic Engine Tech
2
Mar 26, 2016 04:17 PM
alliance12364
Suspension, Chassis, and Brakes
3
Sep 23, 2015 12:40 PM
fundone2000-RZ
Pacific
0
Jul 21, 2015 07:21 AM
ducttape1975
New Member Introduction
2
Jul 10, 2015 06:29 PM


Thread Tools
Search this Thread

All times are GMT -5. The time now is 02:46 AM.