how do i change front coil springs?
Thread Starter
Registered User
Joined: Dec 2001
Posts: 1,026
From: Ohio
how do i change front coil springs?
my eibachs came in today and i know how to do the back springs, but what about the front? can someone give me some information on this? if you got a webpage that would be great.
also i was wondering if i got to use a spring compressor, and which type?
thanks in advance, this will be my first mod, even though it's not going to make my car quicker...i guess it may be faster in the curves though.
also i was wondering if i got to use a spring compressor, and which type?
thanks in advance, this will be my first mod, even though it's not going to make my car quicker...i guess it may be faster in the curves though.
Registered User
Joined: Jan 2001
Posts: 2,148
From: Bay Area, CA
MacPhereson strut (spring) compressor, Torx 50, Chiltons manual will help.
You can tilt the coil over assembly and rotate, after removing end links and moving sway bar out of the way, you do not need to remove the ball joints just be carefull of your brake lines.
You can tilt the coil over assembly and rotate, after removing end links and moving sway bar out of the way, you do not need to remove the ball joints just be carefull of your brake lines.
Last edited by Dr.Mudge; Mar 17, 2003 at 06:17 PM.
Registered User
Joined: Dec 1969
Posts: 27,725
From: Little Rock, AR
Not everything will apply, but Fred/Injuneer's guide will help.
Thread
Thread Starter
Forum
Replies
Last Post
dbusch22
Forced Induction
6
Oct 31, 2016 11:09 AM
Carogna'sZ-28
Suspension, Chassis, and Brakes
0
Feb 3, 2015 07:04 PM
chevroletfreak
LT1 Based Engine Tech
202
Jul 4, 2005 05:00 PM
