HO intercooled w/ P600B / 8psi. 2 core intercooler

Reply Subscribe

Thread Tools

Search this Thread

Jul 21, 2003 | 11:24 AM

FacelessZ

Thread Starter

Registered User

Joined: Jun 2003

Posts: 2,626

From: Baylor University - TX

HO intercooled w/ P600B / 8psi. 2 core intercooler

I just ordered an ATI Procharger and am wondering what else I'd need along with the kit.

Thanks!

Jul 21, 2003 | 11:48 AM

kmook

Advanced Tech Moderator

Joined: Aug 2001

Posts: 2,262

From: Nashville

Larger injectors and a tune come to mind offhand.

Jul 21, 2003 | 11:48 AM

95NX-TA

Registered User

Joined: Dec 2001

Posts: 117

From: DC, Metro Area

I got a Boost Gauge, Air/Fuel Ratio Gauge, and Fuel Pressure Gauge to keep an eye on everything. Then I got some injectors with the pintle style tip (Accel,SVO,etc..) to get rid of any injectors lock-up under full boost. Those are the basics that I consider necessary. But I am also going to order a Racetronix in-tank fuel pump to be even safer. I know the motor won't last forever but I want it to last about 8-10 months until I build another with forged internals.

Later, Nick

Jul 21, 2003 | 11:50 AM

IDOXLR8

Registered User

Joined: Apr 1999

Posts: 2,784

From: Rochester Hills, MI

Spark plugs and wires, Retard box, and money set aside for an engine rebuild.

Jul 21, 2003 | 01:03 PM

95 Silver TA

Registered User

Joined: Apr 2001

Posts: 1,132

From: Florida

Colder Plugs, an MSD BTM retard box or Tuning with injectors is a better route than the FMU.
I found the my scanmaster, Boost Guage and Electric Fuel Pressure guage to be very usefull too.

Hope that helps,
Claude