Listed below is what I have in the car right now. I have $600 to spend. I could go with an XE Cam set-up, Warbird Hood (like a ram air), Hooker cat-back and BMR Adjustable Torque Arm, NX Wet Kit... My options are open. Would like to do a nice HP mod probably more than anything. What are your suggestions?

ENGINE:
LT1 PRO EDIT OBD1
VALVOLINE SYNTHETIC OIL
STOCK 5.7 LITER 350 ENGINE
MOROSO COLD AIR INDUCTION
TAYLOR OCV 8MM WIRES
BOSCH PLATINUM PLUGS
MEZIERE ELECTRIC W.P.
JET TB AIR FOIL
1LE ELBOW
HYPERTECH 160 STAT
HEADS: LT1 ALUMINUM
RESURFACED AND CLEANED
NEW VAVLE GUIDES
1.94 I. SBI HIGH-FLOW STEEL
1.50 E. SBI HIGH-FLOW STEEL
1.6 SUMMIT RR'S 7/16 STUD
SUMMIT GUIDE PLATES
COMP CAM 5/16 PUSHRODS
CRANE SPRING REATINER SET
10308-1 CRANE SPRINGS
HARDENED SEALS AND LOCKS
ARP HEADS BOLTS
ARP SCREW IN STUDS
FELPRO GASKETS

*TRANSMISSION:
10" TCI STREET FIGHTER,
STALL CONVERTER
TRANSGO SHIFT KIT
ENEGRY SUSP. TRANNY MOUNT
ENERGY SUSP. TRQ ARM BUSHING
REBUILT A4 TRANNY
RAYBESTES CLUCTHES
RAYBESTED BANDS
SUMMIT 19,000 COOLER
MOBILE ONE SYNTHETIC
LS1 ALUMINUM DRIVESHAFT
BMR DRIVESHAFT LOOP

*REAR-END:
GM MOTIVE 3.73 GEARS
ROYAL PURPLE SYNTHETIC

*EXHAUST:
HOOKER SHORTY HEADERS
CERAMIC COATED
94/95 STYLE SINGLE CAT
FLOWMASTER Y-PIPE & S-PIPE
3" EXHAUST TO CUT-OUT
FELPRO GASKETS
ARP HEADER BOLTS
FLOWMASTER 80 SERIES
SUMMIT 3" CUT-OUT

*WHEELS:
15 X 3.5 WELD DRAGLIGHTS
15 X 8 WELD DRAGLIGHTS
165 X 15 SKINNIES
26 X 10.50 X 15 E.T. STREETS

*SUSPENSION:
BMR TUBULAR LCA'S
BMR BOXED SFC'S
BMR RELOCATING BRACKETS
R/R DRAG AIRBAG
V6 SPRINGS

*MISC:
PRO FORM SHIFT LIGHT

 

Everyone here seems to be pushing the AFPR on me. I think I'm gonna get one.

 

Get an envelope.. Slip in a check for $600 and mail it to me.



Very thoughtful of you bro! I could really use it right now!

 

I'll sell ya a dollar for $600

 

Terrific Replies guys! Just what i was looking for to help me out.

 

I've got a set of BFGoodrich KDW's, heres a pic of them, they are in great shape.

http://home.off-road.com/~ajlarnach/...aavidv4001.jpg

They have only a few passes on them.

 

Thanks, but in my initial post I wrote that I have Slicks. Just bought a set of Weld Draglights 15x3.5 in the front and 15x8 in the rear with E.T. Streets last week.

 

get some non coated longtubes and a custum ypipe. That should be pretty close to 600.

Marcin

 

send the heads over to lloyd there in texas for porting, then take the difference and take your girl out for a night on the town

 

I have Hooker Shorty Headers Cermaic coated with a Flowmaster Y-Collector already. Im kind looking for things that I dont already have

 

I have a set of fully ported heads sitting here on the floor. And my wife does not like to go out alot.

 

WEll i am sure u are goin to gain more hp/tq if u get longtubes over shorties with a silly FLOWMASTER.

FLOWMASTER= CRAP

 

Well lets see, I instaled the Flowmaster Y-pipe and 3" Exahust from the Y-pipe to the cut-out and I picked up 15 RWHP and 15 RWTQ. I would say that "crappy" Y-pipe did alright for $29.

I dont want to "redo" anything that I have already done, I did my mods for a reason. Im looking to knock off some E.T. time with the $600.

 

Hotcam.

 

A Hotcam is $175.00. I was thinking of a bigger cam like the XE 224/230 or 230/236 on a 112 LSA. I would still have a little money to burn after that.