I snapped one of the three ARP bolts that hold the sproket to cam.
(the torque wrench I have sucks) can I still run it with 2APR with lots of threadlocke and a lot of luck lol. I won't be running nitrous and if I do it won't be for a while like a long time.

 

Absolutely not. You need to repair it correctly.

 

Drill it out, take your time with an extractor kit and a good/correct size drill bit (being sure to keep shavings contained). It isn't that difficult, and you will thank yourself later

 

Should i take the cam out of the car

 

Drill it out better to do it right then half a** and regret it in the long run

 

If you don't feel comfortable drilling it out, take it to a machine shop. They may or may not overcharge you, but at this point you need to have this addressed properly. So yes you can take the cam out of the engine and have it fixed.

tia

andy schuck

 

If you do do it yourself,grind the tip of the twist drill (drill bit) to about 20 deg. that will cut that hard metal easier.

 

yea i took it out of the car (stupid question but w/e) drilled a hole in the center took it to ace where i know the manager and he drille dit out for me and the cam is back in with three bolts and almost ready to crank her up 2nite hopefully. thanks guys