CamaroZ28.Com Message Board

LT1 Based Engine Tech 1993-1997 LT1/LT4 Engine Related

heads/cam guys inside

   
Old Jun 11, 2006 | 07:01 PM
Share
  #1  
speed_demon24's Avatar
speed_demon24
Thread Starter
Registered User
 
Joined: Mar 2002
Posts: 3,245
From: Ocala, Florida
heads/cam guys inside
What spark plugs are you running? I'm just running the stock heat range autolite 106's, should I be running 1 step colder than stock, or the stock heat range?
Reply
Old Jun 11, 2006 | 08:26 PM
Share
  #2  
Slowmofo's Avatar
Slowmofo
Registered User
 
Joined: Jun 2005
Posts: 5
Re: heads/cam guys inside
NGK TR55's right now
Last edited by Slowmofo; Jun 12, 2006 at 04:57 AM.
Reply
Old Jun 11, 2006 | 10:04 PM
Share
  #3  
big dave's Avatar
big dave
Registered User
 
Joined: Apr 2000
Posts: 564
From: Silver Spring ,Md.
Re: heads/cam guys inside
TR55s here using the stock gap.
Reply
Old Jun 12, 2006 | 07:56 AM
Share
  #4  
96capricemgr's Avatar
96capricemgr
Registered User
 
Joined: Feb 2004
Posts: 4,800
Re: heads/cam guys inside
If you want to stick with the Autolites go to a 104, otherwise as said the NGK TR55 is good, TR6 if you really pushed the compression up and drive in hot conditions might be a good idea.
Reply
Old Jun 12, 2006 | 08:03 AM
Share
  #5  
WhyHelloOfficer's Avatar
WhyHelloOfficer
Registered User
 
Joined: Jul 2004
Posts: 235
From: Gainesville, FL
Re: heads/cam guys inside
Originally Posted by Slowmofo
NGK TR55's right now
Running the TR55s now on my cammed car.. I'll be going with the TR6s when the kit goes on
Reply
Old Jun 12, 2006 | 10:31 AM
Share
  #6  
JustNO's Avatar
JustNO
Registered User
 
Joined: Apr 2005
Posts: 1,025
From: Europe
Re: heads/cam guys inside
Its related to heads.. I know you can't use TR series for AFR heads for example.
Reply
Old Jun 12, 2006 | 01:09 PM
Share
  #7  
user 647483's Avatar
user 647483
Banned
 
Joined: Apr 2000
Posts: 1,444
Re: heads/cam guys inside
Originally Posted by big dave
TR55s here using the stock gap.
same
Reply
Old Jun 12, 2006 | 01:41 PM
Share
  #8  
CamaroBoy96Z28's Avatar
CamaroBoy96Z28
Registered User
 
Joined: Aug 2002
Posts: 2,356
From: Madison Heights, MI
Re: heads/cam guys inside
Originally Posted by James Montigny
same
Here too
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
New girl with new car and new problems
Magenta_Hearts
New Member Introduction
4
Mar 25, 2015 10:24 AM
Engine overhaul- main and rod bearings
carl.froehlich
LT1 Based Engine Tech
6
Mar 13, 2015 12:38 AM
Fixed obnoxious rattle in trunk area on convertable
squarehead
General 1967-2002 F-Body Tech
0
Nov 21, 2014 08:02 PM
Car backfiring after heads/cam install....solutions??
F(ast)-body
LT1 Based Engine Tech
8
Feb 26, 2003 09:05 AM
Mystery Pop?
Red97LT1
Car Audio and Electronics
0
Aug 7, 2002 05:45 PM
Back to Subforum
LT1 Based Engine Tech
View Next Unread
O2 censors


Thread Tools
Search this Thread
Search this Thread:

Advanced Search

Advanced Search

All times are GMT -5. The time now is 10:14 AM.