harmonic/seals

Reply Subscribe

Thread Tools

Search this Thread

May 10, 2006 | 10:39 AM

radarb8

Thread Starter

Registered User

Joined: Jan 2002

Posts: 104

From: Moose Jaw Sk Canada

harmonic/seals

I want to remove the hamonic balancer on my 1995 to repace the seal that is leaking and need to know if a universal remover will work or is the LT1 need a special remover?

May 10, 2006 | 11:54 AM

Jeff95TA

Registered User

Joined: Apr 2004

Posts: 341

From: Pittsburgh, PA

Re: harmonic/seals

I used a universal 3-claw puller and a 1/4" drive extension bottomed inside the crank bolt hole.

May 10, 2006 | 01:54 PM

Mtrhds94Z

Registered User

Joined: Mar 2000

Posts: 1,955

From: Point Pleasant, NJ... USA

Re: harmonic/seals

You need to remove the balancer and also the hub that it bolts to..

May 11, 2006 | 02:06 PM

radarb8

Thread Starter

Registered User

Joined: Jan 2002

Posts: 104

From: Moose Jaw Sk Canada

Re: harmonic/seals

What is the proper way to reinstall ? Will a universal puller/reinstaller work to put the hub back on?

Reply Subscribe

Thread Tools

Search this Thread

Show Printable Version

Email this Page

Reply Share

First
Prev
1 / 1
Next
Last