Got Dragon Fire?
#16
I don't think it should be called a "fail" until somebody atleast tries it. The Dragon Fire could be the greatest thing ever for an LT1. Just what we are all looking for to fix a weak link in our motors. But in the past their service has been horrible. I wish I had 300 bucks to try it.
#17
Come on, they are claiming a 100tq gain at 5000rpms how blatant does a lie have to be before you are allowed to call someone one it?
It does note fuel and spark changes as well but for a LT1 to lose torque like that it would have to be horribly neglected and badly tuned and then the PROBLEMS corrected when adding the new part.
It does note fuel and spark changes as well but for a LT1 to lose torque like that it would have to be horribly neglected and badly tuned and then the PROBLEMS corrected when adding the new part.
#18
Come on, they are claiming a 100tq gain at 5000rpms how blatant does a lie have to be before you are allowed to call someone one it?
It does note fuel and spark changes as well but for a LT1 to lose torque like that it would have to be horribly neglected and badly tuned and then the PROBLEMS corrected when adding the new part.
It does note fuel and spark changes as well but for a LT1 to lose torque like that it would have to be horribly neglected and badly tuned and then the PROBLEMS corrected when adding the new part.
Not sure why people complain of poor customer service I got them on the phone right away (which is a miracle these days) and they were more than helpful.
#19
The stock Delco/Delphi stuff has always worked fine for me, the two unvented units I have had proved to be trouble free units. The first one lasted 10 years trouble free and was killed by the WP, the second was working perfect when it was pulled last week for a vented conversion. Once again went with a Delphi unit opposed to these sketchy after market units that seem to cause nothing but trouble. The optis are not the LT1 weak link, people who use junk parts, can't install things correctly and refuse to diagnose problems are because it's easier to blame the opti.
Last edited by neil350; 03-20-2009 at 05:13 PM.
Thread
Thread Starter
Forum
Replies
Last Post
Ryan Ramsaran
LT1 Based Engine Tech
3
09-19-2015 08:43 PM