ive gotten quotes from 250-400 for my clutch a PP

and 325 is the best price for laboron the gears and thats from SPEED INC.

Are these prices fair? the best price on the clutch is 244.. speed inc wants 325.. and there like 30mins - 45 mins away from me

are they bending me over or is that fair?

for the gears they recal the spedo n stuff too (i guess that comes with lube?)

 

Rent a tranny jack and do it yourself It's FREE and local...

 

that takes time.. and skill.. i have the time.. but not the ***** to rip into my tranny.. im sure i COULD do it though

 

I paid $298 canadian (tax in) for my clutch install. That was from my local GM dealer. Check out a local dealer and see what they want for an install. You might be surprised

Not sure what a gear install might be worth though.... hopefully i'll have 4.10's in my car when this damn weather clears up! I'd get someone thats experienced to do your gears to make sure they remain quiet throught the life of the rear end.

-Cam

 

Do it yourself if your somewhat mechanically inclined youll gain knowledge as well as a new clutch as for the gears I would have a pro do it. And that doesnt seam that bad as I have seen it go for 400-500. Here is a coupla links for clutch installs http://www.zmydust.com/lt1clutch.html http://www.bfranker.badz28.com/fbody/t56.htm
Good Luck

 

You are probably looking at 200 for a clutch install and btw 150-300 for a gear install.

 

This is exactly the price I was thinking ....go down to your local pep boy's , If i aint mistaking it is a flate rate of 200 dollars for a clutch install for rear wheel drive , be weary of people who install gears cheap beacuse when it comes to that you get what you pay for ......

 

Those are fair prices.

 

i have no idea where a pep boys is round here.. hah. But i think for 325 ima have speed inc do my clutch. They specalize in fbodys so im sure they know what there doing with that kinda stuff..

 

Specialize in f-bodies ? bro , at the pep boys here all 3 of the mechanics that are my good friends drive f-bodies 1 drives a 95 trans the other a 98 formula and the other has a 95 Z28 and a 2002 ram air so yeah they specialize in them Big time to bad you aint from around here i could get you a good deal on labor Good luck.............

 

Speed Inc. does pretty much specialize in Fbodys. I've been there, saw about 15 fbodys, a few stangs, and a few vettes.

 

yeah speed inc does specalize in fbodys for the most part.. ANd my clutch im having done by a guy i know from my auto class.. for 250... Ima help him (basically so i can learn) but yeah 250 is better then 350