Does anyone here have pictures of their fuel system? I'm looking to upgrade to stainless lines, boost referenced regulator, filter, etc... and need some ideas on plumbing so I can keep things looking neat underneath the hood.

-B

 

ttt for system pics!

-B

 

First pick the pump you want and figure out where you're gona install it. Then call the tech guys at Summit. When you find out what you "should" do, you'll get someone else to do it.

2 golden rules for installing a pump outside the tank that is the only pump in the system. It must be as close to the tank as possible and the tank should drain from the bottom to the pump.

Some use a helper pump located outside the tank which also has one in it. Some just upgrade the one inside the tank.

I chose to sump the tank and put only one on the outside and powered it up from the original voltage source.

One last thing, the stainless hose is a bitch to work with when cutting and terminating so get matched hose and couplings. Good advice from the folks at Summit goes a long way.