Fast Track harness install question
Thread Starter
Registered User
Joined: Oct 2000
Posts: 507
From: Sioux Falls, SD
Fast Track harness install question
I need a little help decifering what this means in the directions.
It says "splice orange wire tagged 12 BATT from FRELPRO PCM connector cavity M-01 into orange wire that terminates at GM PCM connector B cavity 15 or cavity 30"
It also says "this is a 3-way splice."
For reference, there are 5 steps that have 3-way splices. The next connection is "Splice pink wire tagged KEYPOWER from FELPRO PCM connector cavity L-03 into pink wire that terminates at GM PCM connector B cavity 30."
So, tell me what to do? what is the "3-way" splice? Since these are the power circuit connectors, should I just "slide" the insulation away from the existing wire and make the splice, leaving the wire connected to BOTH pcm's? or should I simply cut the wire from the stock PCM and connect it to the speed pro?
Jesse
It says "splice orange wire tagged 12 BATT from FRELPRO PCM connector cavity M-01 into orange wire that terminates at GM PCM connector B cavity 15 or cavity 30"
It also says "this is a 3-way splice."
For reference, there are 5 steps that have 3-way splices. The next connection is "Splice pink wire tagged KEYPOWER from FELPRO PCM connector cavity L-03 into pink wire that terminates at GM PCM connector B cavity 30."
So, tell me what to do? what is the "3-way" splice? Since these are the power circuit connectors, should I just "slide" the insulation away from the existing wire and make the splice, leaving the wire connected to BOTH pcm's? or should I simply cut the wire from the stock PCM and connect it to the speed pro?
Jesse
Thread
Thread Starter
Forum
Replies
Last Post
