Error Code P0100; replaced MAF - code still there help!
Thread Starter
Registered User
Joined: Sep 2002
Posts: 470
From: Gwinnet County, GA
Error Code P0100; replaced MAF - code still there help!
Hey guys
Just had the SES/P0100 code thrown a few days ago
-First i cleaned (carefully) the inside of the MAF (sensors) with rubbing alcohol and Q-tips; cleaned it all really well as well as the MAF harness terminals etc. This did not fix the problem.
-After that I went to advance auto and got a reman MAF sensor ... removed the PCM BATT fuse, replaced it then cranked the car - SES still there. I ran the car for a little while and the SES still persisted....
I'm just wondering what else this could be symptomatic of? I'm desperate for info here. Any help would be awesome...
thanks!
Just had the SES/P0100 code thrown a few days ago
-First i cleaned (carefully) the inside of the MAF (sensors) with rubbing alcohol and Q-tips; cleaned it all really well as well as the MAF harness terminals etc. This did not fix the problem.
-After that I went to advance auto and got a reman MAF sensor ... removed the PCM BATT fuse, replaced it then cranked the car - SES still there. I ran the car for a little while and the SES still persisted....
I'm just wondering what else this could be symptomatic of? I'm desperate for info here. Any help would be awesome...
thanks!
Registered User
Joined: Dec 1969
Posts: 27,725
From: Little Rock, AR
Re: Error Code P0100; replaced MAF - code still there help!
Why not continue the old thread that catalogued what you had done? Did you check the power wire as Injuneer suggested in the original thread?
Thread
Thread Starter
Forum
Replies
Last Post
chevroletfreak
LT1 Based Engine Tech
202
Jul 4, 2005 05:00 PM
supercharged94Z28
LT1 Based Engine Tech
12
Feb 24, 2003 10:22 PM
