EGR gaskets?
06-24-2003, 10:44 PM
#1
Registered User
Thread Starter
Join Date: Feb 2003
Location: Toledo, OH
Posts: 1,017
EGR gaskets?
When blocking the EGR do you need new gaskets for the 2 plates on the intake? Or can you just pull off the old gaskets and use soem RTV? What RTV would you reccomend (black or copper)?
06-25-2003, 05:03 AM
#3
Registered User
Join Date: Nov 2000
Location: Kansas City suburb of
Posts: 2,734
I used copper on mine.
I had an EGR blockoff plate that I bought from GM but then I ran into the OTHER hole in the manifold so I got some hi temp gasket material and took the metal hose out of its bracket, cut me a gasket and used the bracket and my gasket as my blockoff.
I had an EGR blockoff plate that I bought from GM but then I ran into the OTHER hole in the manifold so I got some hi temp gasket material and took the metal hose out of its bracket, cut me a gasket and used the bracket and my gasket as my blockoff.
Thread
Thread Starter
Forum
Replies
Last Post