I did alot of searching and found that people are having success with Earls Header Gaskets. I have already blown a set of Fel-pro and want to try this other gasket. Can someone give me the part # for the Earl's gaskets I will be needing with Pacesetter LT's? Summit lists two different part #'s that will fit my application. Thanks, Kevin

 

The part # is EAR-29DA3BERL. This is for the gasket kit. Both sets of inserts and aluminum retainers. They come assembled and ready to put on. They also have just the inserts but don't list the number. Good luck.
HVY SS

 

Thanks for the reply...I hope this will do the trick along with the breslin header bolts...No more leaks!!!

 

I've been using those gaskets with Stage 8s, never any problems.

 

Just want to mention...

ANY gasket will work if you follow a simple procedure:

Basically, every time you start the car, snug up all the header bolts before starting; until you find no loose bolts two times in a row.

Then double check it a few days later just to be sure.

You should only have to go through this 3 or 4 times, max; before you stop finding loose bolts.