dynotune prices???
Thread Starter
Registered User
Joined: Mar 2002
Posts: 565
From: mt. holly, nc , usa
dynotune prices???
theres a shop near me that dynotunes lt1's. id really like to get this done but they want $385.00 for the first hour!!!!! is it just me or does that seem crazy? i've never had this done or know anybody that has so let me know guys.
Banned
Joined: Aug 2001
Posts: 3,505
From: looking for a flow bench so Brook and I can race
Originally posted by IDOXLR8
385.00 for the first hour is outrageous. Depending on the extent of your mods you can spend anywhere from 300-500 for a complete dynotune.
385.00 for the first hour is outrageous. Depending on the extent of your mods you can spend anywhere from 300-500 for a complete dynotune.
Banned
Joined: Aug 2001
Posts: 3,505
From: looking for a flow bench so Brook and I can race
Registered User
Joined: Nov 2001
Posts: 719
From: Summerfield, NC USA
droptopz,
Don't know how far away you are from Greensboro, this shop does it for $100/hr dynotune, $75 for 3 pulls, no tune.
Turbo-Tune US LTD
941 S Chapman St G'boro
336-378-1252
THey use a Dynojet Chassis Dyno.
I need to get my truck running right, then going to get a base pull on it.
good luck.
Don't know how far away you are from Greensboro, this shop does it for $100/hr dynotune, $75 for 3 pulls, no tune.
Turbo-Tune US LTD
941 S Chapman St G'boro
336-378-1252
THey use a Dynojet Chassis Dyno.
I need to get my truck running right, then going to get a base pull on it.
good luck.
Thread Starter
Registered User
Joined: Mar 2002
Posts: 565
From: mt. holly, nc , usa
hotwire-- do u know of anybody that has had there lt1 tuned there? how good of work they did to it? i know just anybody cant tune lt1's so it would be nice to find someone with experience. greensboro is about 1 1/2 hrs from here so id go if it was worth it. thanks guys
Berty
Berty
Registered User
Joined: Nov 2001
Posts: 719
From: Summerfield, NC USA
I'm just now really getting into the z rage. I was s-10 for so long, i wanted a camaro bad, but never really talked to any of the guys, might want to check these guys out and ask them. I attended one of their meets, they are a bunch of really nice people.
I'll ride down there once my truck is running again and scope it out, ask some stuff to see if they know what their doing. they sound really busy on the phone, so I would say that's a good sign.
http://groups.yahoo.com/group/piedmontss4thgenowners/
I'll ride down there once my truck is running again and scope it out, ask some stuff to see if they know what their doing. they sound really busy on the phone, so I would say that's a good sign.
http://groups.yahoo.com/group/piedmontss4thgenowners/
Moderator
Joined: Dec 1969
Posts: 10,745
From: Buffalo, New York
My friend Bob Kennedy does dynotuning and charges $125/h. Fully instruemented (2 wide band AF meters, up to 8 EGT probes, FP, IAT, MAP, water temp, oil temp, etc.). He does it all himself and has <40y high performance experience. Unless it were the ghost of Smokey Yunick doing the tuning or something like that, I'd say $385/h is absurd.
Rich Krause
Rich Krause
Registered User
Joined: Feb 2000
Posts: 1,335
From: Cleveland,OH
Originally posted by rskrause
My friend Bob Kennedy does dynotuning and charges $125/h. Fully instruemented (2 wide band AF meters, up to 8 EGT probes, FP, IAT, MAP, water temp, oil temp, etc.). He does it all himself and has <40y high performance experience. Unless it were the ghost of Smokey Yunick doing the tuning or something like that, I'd say $385/h is absurd.
Rich Krause
My friend Bob Kennedy does dynotuning and charges $125/h. Fully instruemented (2 wide band AF meters, up to 8 EGT probes, FP, IAT, MAP, water temp, oil temp, etc.). He does it all himself and has <40y high performance experience. Unless it were the ghost of Smokey Yunick doing the tuning or something like that, I'd say $385/h is absurd.
Rich Krause
Banned
Joined: Aug 2001
Posts: 3,505
From: looking for a flow bench so Brook and I can race
Originally posted by rskrause
My friend Bob Kennedy does dynotuning and charges $125/h. Fully instruemented (2 wide band AF meters, up to 8 EGT probes, FP, IAT, MAP, water temp, oil temp, etc.). He does it all himself and has <40y high performance experience. Unless it were the ghost of Smokey Yunick doing the tuning or something like that, I'd say $385/h is absurd.
Rich Krause
My friend Bob Kennedy does dynotuning and charges $125/h. Fully instruemented (2 wide band AF meters, up to 8 EGT probes, FP, IAT, MAP, water temp, oil temp, etc.). He does it all himself and has <40y high performance experience. Unless it were the ghost of Smokey Yunick doing the tuning or something like that, I'd say $385/h is absurd.
Rich Krause
My good friend goes to school there I'd have to go through canada (just turned 19
) and duffs has some great wings....ohh yeah, i got this problem with my knee I need you to take a look at too rich
Once again, NY owns all
see you soon rich
i expect a celebrity discount
Moderator
Joined: Dec 1969
Posts: 10,745
From: Buffalo, New York
Originally posted by anaik
Do you have his address and phone number? Is he in Buffalo? That wouldn't be too long of a drive from Cleveland.
Do you have his address and phone number? Is he in Buffalo? That wouldn't be too long of a drive from Cleveland.
Rich Krause