Well I posted my dyno numbers a couple weeks ago and promissed i would get the charts up, so i finally scaned them

Car made 277 rwhp & 314 rwtq

Mods:
MAC headers
MAC Cat-Back
LPE Cold Air

 

is that 1/4 time with that dyno?

 

nice numbers, but whats even nicer is your trap speed. I have very similar mods and my best trap speed was 102.

 

Yup, My real trap speed is 104.9.. 105 looks better so i rounded up,. That's what i learned in school

however i believe my opti is on it's way out. So i'm replacing it when the cam goes in on June 23, Then i'll have some new dyno numbers.

 

what was the weather liek when you ran? that is a hell of a trap for the power you have. also with a lower 60 foot you could have run low 13's possibly even 12's with slicks

 

Did you get your PCM mail order tuned?

Dan

 

That looks like a stock tune to me.

 

Not chiped yet, That for after the cam

 

Do you happen to have the RPMs for that graph anywhere? At least the first and last on the graph...

 

Weather is usally around 20-33Celsius don't know what that is in Fairinheight. Yup driving leassons whould be good for me to have. I'd go faster than 13.6

 

Graph starts at 2400 rpm, and ends at 5400rpm, The lines cross at 4400-4600rpm.

Hope that helps you, There printer ran out of ink when i was there

 

WoW!

Congrats on the great numbers and times. I ran 105 mph in my T/A in PR weather with the crane powermax 2033 cam and very mild headwork. Good job!

I did run 13.0's at 105 though.

 

The difference is that he has a t56.