Dyno and Track Results 230/236
#19
Good power in the upper RPM band it keeps pulling real good at the end of the track. Where my HotCam seems to drop off at the end. I say for right now it's a darn good cam.
SVO 30lb Injectors.
SVO 30lb Injectors.
#23
Hey Ken..do think that the 3.42's were perfect for the hotcam?...i have your exact same set up(before the swap) however with a 2200 RPM stall and 3.73's...should it even out since you have a larger stall or are the 3.73's too much for the hot cam..any advice appreciated...thanks Tony
#24
I think the 3.42's are perfect with the HotCam but there is always that side of me wondered what if I had 3.73's.
I'm going to try to find some 3.73's for the car and swap that out with some 3.42's
I'm going to try to find some 3.73's for the car and swap that out with some 3.42's
#25
I don't think that there are many diffrences between my car and yours except for trannies. Maybe he could just load your file for an M6 and 4.10's. Anything has got to be better than what he gave me. It's way fat. I'll try and call. I'm coming to Tulsa tommorow for the next 2 weeks. Might just bring my computer w/ me so I can take it to him. hmmmm.
#27
What would you say streetability is like with that cam? Is there much power under 2000 rpm? Any cam surge? Oh and which 230/236 did you go with? Since there is 3 different ones, unless I'm missing something.
#30
Originally posted by jmzlt1
Is that motor a 350? How did you get rwtq in the 460's while greanbeast has 368 rwtq? That means your pulling more torque than the stroker crowd!
Is that motor a 350? How did you get rwtq in the 460's while greanbeast has 368 rwtq? That means your pulling more torque than the stroker crowd!