crankshaft position sensor
Thread Starter
Registered User
Joined: Feb 2004
Posts: 152
crankshaft position sensor
does anyone know where it is located? i got a code so i bought a new one, what is weird is the car runs fine and starts fine, and i have delt with cars that have bad crankshaft position sensors.
Registered User
Joined: Oct 2001
Posts: 1,007
From: Folsom, CA, USA
It's just visible in the lower left corner of this pic - http://www.go-fast.org/z28/MyParts/crankseal1.jpg
White connector with wires going in to it. The hub is off the crank in that pic, but you don't need to remove the hub to change the sensor.
Dave
White connector with wires going in to it. The hub is off the crank in that pic, but you don't need to remove the hub to change the sensor.
Dave
Registered User
Joined: Dec 1969
Posts: 27,725
From: Little Rock, AR
Another visual. Most other cars will not run with a bad crank sensor. The LT1 is different, in that it gets position info from the optispark for ignition purposes. The crank sensor is only used for detecting misfires. 
Thread
Thread Starter
Forum
Replies
Last Post
