Cannot wait til summer.
I finally got a job but I decided to hold off on the car mods. I want to redo the stereo system that came with the car first and come this summer I will start making my car faster. I wanted to wait til this summer so that way I would have more time to work on it. Here is my list of current mods that I know about. Note all these mods where done by the guy who owned the car before me. Their could still more mods I do not have knowledge about but I doubt it.
Gutted CAT with catback performace exhaust (at least I think it is catback).
After market fuel injectors pushing around 60 psi of fuel pressure.
The chip has been reprogramed.
The timing has been changed.
After market spark plugs.
Drop in after market K&N.
After market MAF.
The first thing I'm going to buy is K&N CAI but what to do after that. I want to do all the minor mods first so I might buy some of those over drive pullys as well. But what should I do after that? I want to do some major mods but like I said I want to get everything small done first then tackle the big stuff later. So any suggestions on what mods I should do this summer?
Thanks for the help,
Chris
Gutted CAT with catback performace exhaust (at least I think it is catback).
After market fuel injectors pushing around 60 psi of fuel pressure.
The chip has been reprogramed.
The timing has been changed.
After market spark plugs.
Drop in after market K&N.
After market MAF.
The first thing I'm going to buy is K&N CAI but what to do after that. I want to do all the minor mods first so I might buy some of those over drive pullys as well. But what should I do after that? I want to do some major mods but like I said I want to get everything small done first then tackle the big stuff later. So any suggestions on what mods I should do this summer?
Thanks for the help,
Chris
Why do you have aftermarket fuel injectors and a higher fuel pressure? Did the previous owner run nitrous through the car? You might want to bolt some nitrous up to it considering what your previous owner did!
Thread
Thread Starter
Forum
Replies
Last Post
Nayr
LT1 Based Engine Tech
7
Mar 3, 2023 08:34 PM
68camaroboltz
General 1967-2002 F-Body Tech
3
Oct 5, 2015 11:56 PM
PFYC
Supporting Vendor Group Purchases and Sales
0
Sep 18, 2015 03:46 PM
jackpawt883
LT1 Based Engine Tech
7
Sep 10, 2015 08:53 PM



