Didn't know if i should post this here or apperince. But apperince seems to be more about rims then anything. Snice i moved back here to this cold weather, my head liner started sagging really bad. They sell glue at auto zone to glue it back. I was thinking this would be the cheapest way to fix it. But how to i take it off? Anyone know of a guide somewhere?

 

I replaced mines completely with a new GM unit, cost like 120. pretty much what you need to do is take the visors off, can be done with any hand held phillips screw driver, pop the seat beltplastic cover deals off the headliner. pop the A pillar off and pop the other pillar on the pssenger side off.

I just took the visors off, poped the seat belt deals and yanked it out. I also put the new head liner in with out takeing the pillars off, talk about a pita, I stuffed in by holding the plastic back with a screw driver and getting it in. Surprisingly enoght, it all came out perfect. Looks like the factory installed it.

 

Alright thank you, Ill give the glue a try first, then i guess ill hit the junk yards. Then the dealership.

 

Don't know about glue, but 3-M makes a "Heavy Duty" spray adhesive designed for headliners, etc.