I am getting ready to buy some Canfield Heads from a guy he said that they were never released to the public
well this is what he told me
NEW Canfield LT1 heads that were never released for public sale w/220 intake runners , 58cc chambers , stainless 2.08 in. 1.60 ex. , Comp springs good to .600 lift , set up to run center bolt or primeter bolt valve covers , they use a Fel Pro 1206 In. (mod to fit ) and a 1406 Ex. must use a .150 offsetIn. rocker (Jegs sells a whole set for $219 , ARP 7/16 studs and hardend guide plates . I don't have flow sheets .

Does anyone know anything about these heads are they any good or do they even exist (am I going to get wroked over on this deal.)
I want to get them on a flow bench before I hand over the cash.

 

Canfield sold LT1 heads for a year or so, then stopped making them. Not sure if they were the same as the ones you mentioned. I know two people who had Canfields.... one has a website and indicates he wasn't too happy with them "out of the box". He indicates his had 200cc runners.

http://www.dw-zone.com/

Click on "My 94 Firebird Formula....." and scroll through the years to 2000 and there is a link to info on the Canfields.

A personal friend of mine found a used set of Canfields that sound similar to what you mentioned.... he put them on a 383 with a Vortech blower that made 1,125flywheelHP, and ran 9.04 @ 155mph in a 3,900# 30th SS convertible. But I know the heads were heavilly reworked, including relocating the valves. I doubt Canfield would have recognized them.