Well I have a 95 Z28 and have the following mods: Hooker lts, y-pipe, cat-back, k&n cold air intake.

What cam should I go with? I dont want to port the heads or anything so it will have to be fine with stock engine with those mods. So which cam do you suggest? Website url I can purchase one from? Is buying a used cam bad? What kind of power should I expect with those mods and the cam?

Thanks a lot
Jamie

 

How high would you want to rev it up? is it a manual or auto? what's the stall if auto? can you bare a lopey idle.
There are alot of choices, depending on your preferences.

 

I have a m6, don't really want to go over 5800. as long as it run good im not worried about the idle.

 

Here are some choices:
GM 846, 222/230 @ 0.05", 0.509/0.528, 112 LSA
CC 305, 220/230 @ 0.05", 0.510/0.510, 114 LSA
CC 503, 224/230 @ 0.05", 0.503/0.510, 112 LSA
If you're not planning on using n2o then go with 112 LSA, it'll be a little lopey but should give more power.