I know I can put it in the plug on the LT side of the trans(test port) or on the line going to the trans cooler,or the pan my ? is where is the best place to put It I would like to lean towards the test port for easy of install..If it is not as acurate as the other spots by what % would it be off by?If it is only a few deg. that would be fine by me just want to make sure I dont get it over 200*F Thanks for any help Sean

 

I was just thinking of this after seeing the M6 post...

I'm thinking of putting mine inline of the cooler, but which side ? In or out of the cooler ?

-Shannon

 

if you go on the lines you want to put it on the out line... going to the cooler

 

TTT

 

I plan on putting mine in the pan.

 

Brent94Z and i put ours in the test port and it reads inaccurately as he!! . The gauge pins itself at over 250 DEG. . But the tranny never gets that hot. I dont recommend putting it in the test port. Im gonna move mine here pretty quick to the outgoing line to the cooler and see if i have better luck

 

I was scanning my car and noticed that my transmission temperature sender wasnt working. Does this serve any real purpose for the car besides informational?