c0rey

Well after finally getting around to taking the car out and about after the cam swap i took it for a casual drive, then today i take it out and get on it pretty good pull it back in and have a horrible knocking sound. So I think to myself man maybe a rocker or something came loose. Pull the covers rockers are all fine. Pull the pushrods all straight. So I readjust them and the knocking sound is still there! So I pull the intake manifold off and check it out all the lifters are still there and ect. Im so stumped. Here are the specs on the cam and everything i put into it. I reused the stock lifters.

http://www.domestic-street-scenes.co...in/invoice.jpg

c0rey

Anyone have any ideas?

Wckd94Z

bent valve stem?

c0rey

Vavle Stem? How would i check that? Please dont say pulling the heads.