anyone heard of this cam?
Thread Starter
Registered User
Joined: Jun 2000
Posts: 2,929
From: vancouver, BC, Canada
anyone heard of this cam?
grind number lt1 3109/3112 hr114 +4
serial number l 7662
int .513 ex .510
duration 276 290
valve timing
at .050 int 0 btrdc
40 abdc
exh 52 bbdc 3-atdc
installed on a 110 intake centerline
duration at .050 int220 exh 229
lobe lift .3420 in .3400 exh
lobe sep 114
any ideas on how it will perform on stock heads and manifolds?
serial number l 7662
int .513 ex .510
duration 276 290
valve timing
at .050 int 0 btrdc
40 abdc
exh 52 bbdc 3-atdc
installed on a 110 intake centerline
duration at .050 int220 exh 229
lobe lift .3420 in .3400 exh
lobe sep 114
any ideas on how it will perform on stock heads and manifolds?
Registered User
Joined: Mar 2002
Posts: 78
From: Chester, SC, United States
Well, with a set of stage II ported heads that cam makes about 325-340rwhp. Its alot like the hotcam but with little wider lobe.
The cam does not have a very radical idle, but you can tell its an aftermarket cam. Lope from 1-10: 3 or 4
Cam pulls hard to 6200rpm.
The cam does not have a very radical idle, but you can tell its an aftermarket cam. Lope from 1-10: 3 or 4
Cam pulls hard to 6200rpm.
Thread
Thread Starter
Forum
Replies
Last Post
dbusch22
Forced Induction
6
Oct 31, 2016 11:09 AM
