Does anyone have any tips on making my plug wire swap go smoother?
The passenger side looks like it might be a b*tch to do.
My #5 plug wire burnt on the last set-up, I guess it popped out of the bracket.

 

Go to the store and get the biggest container of time and patience that they have. Maybe even two.

 

haha, I have headers so maybe that will make it a little easier?

 

remove alternator. I deleted my AC. Made everything SO much easier.

 

damn, I just put my alternator back on

 

If you're running your wires through the stock locations, loosen the two bolts holding the power steering. It'll give you more clearance running the wires around it. No need to take it off. And be very, very patient, it's a PITA.

 

when i do my wire next i am going to run the wires over the valve covers and then down beside the TB to the opti.

Ill use something to cover the wires near the TB.

 

I'd recommend running them over the top too, looks like it would be much easier, but with an intercooler on one side and an FMU on the other, I'm out of luck.