Acell DFI Part num
Registered User
Joined: Apr 2004
Posts: 90
Re: Acell DFI Part num
Lingenfelter makes a SuperRam intake that is made to fit LT1 motors. It does not help the top end, but adds a bunch of torque.
Not sure if the Accell part number is the same as the one in the original post, but summit and lingenfelter both sell it.
(EDIT: found the part numbers: baseplate - 74197L, plenum and runners - 74196.)
I am sure that posts will be made to stick with the factory piece.
Not sure if the Accell part number is the same as the one in the original post, but summit and lingenfelter both sell it.
(EDIT: found the part numbers: baseplate - 74197L, plenum and runners - 74196.)
I am sure that posts will be made to stick with the factory piece.
Last edited by red87iroc; Sep 14, 2005 at 01:29 PM.
Registered User
Joined: Feb 2001
Posts: 3,068
From: Cincinnati, Ohio
Re: Acell DFI Part num
Originally Posted by red87iroc
Lingenfelter makes a SuperRam intake that is made to fit LT1 motors. It does not help the top end, but adds a bunch of torque.
Not sure if the Accell part number is the same as the one in the original post, but summit and lingenfelter both sell it.
(EDIT: found the part numbers: baseplate - 74197L, plenum and runners - 74196.)
I am sure that posts will be made to stick with the factory piece.
Not sure if the Accell part number is the same as the one in the original post, but summit and lingenfelter both sell it.
(EDIT: found the part numbers: baseplate - 74197L, plenum and runners - 74196.)
I am sure that posts will be made to stick with the factory piece.
Yes, LPE. I forgot they started making those again. Thanks!
Thread
Thread Starter
Forum
Replies
Last Post
