Accel 300+ cured my hard starts
#1
Registered User
Thread Starter
Join Date: Jul 1999
Location: Winnipeg, Manitoba, Canada
Posts: 3,650
Accel 300+ cured my hard starts
Ever since I dropped the stroker (11.3:1 compression) in I had a hard starting problem once in a while.
Every 4th or 5th time I started the car it wouldn't catch right away or when it did it would idle too high (see vid in signature).
I installed an Accel 300+ ignition and the car starts up on half a turn like a brand new car.
It also revs smoother and there is less roughness in the exhaust note.
Definately a worthwhile mod for anyone with a cam.
I also found out that my Accel ceramic boot wires have almost twice the resistance as my Taylors.
Needless to say I'm putting my Taylors back in.
Every 4th or 5th time I started the car it wouldn't catch right away or when it did it would idle too high (see vid in signature).
I installed an Accel 300+ ignition and the car starts up on half a turn like a brand new car.
It also revs smoother and there is less roughness in the exhaust note.
Definately a worthwhile mod for anyone with a cam.
I also found out that my Accel ceramic boot wires have almost twice the resistance as my Taylors.
Needless to say I'm putting my Taylors back in.
Thread
Thread Starter
Forum
Replies
Last Post
armedtrigger
LT1 Based Engine Tech
10
02-24-2015 08:30 PM
Alex Barnes
LT1 Based Engine Tech
16
01-24-2015 10:21 PM
ferraricameron
Drag Racing Technique
10
07-29-2002 07:46 PM