I'm about to install a Accel 300+Ignition with Coil and need a recomendation on what plugs to run with it. Thanks.

 

Should I stick with NGK TR55 or can I use the Platnium tipped ones?

 

If they are the universal wires you'll need the Optispark boots, you can get those from summit or thunder racing.

If they are already made for the LT1's you'll be fine they should be in the kit.

Stick with TR55's will be fine, unless you want to spend the extra dough, go ahead than.

 

Depends on how often you want to change your plugs and how much you want to spend. The platinum plugs will last longer but cost quite a bit more. The TR-55s are cheap, but will not last as long as the platinums.

 

So I can run platnium plugs with an Accel 300+Ignition with Coil?

 

Yes you can, I have run platinum plugs for years with a 300+.

 

Thanks