Those that are using the Qwik Stick short shifter?
12-11-2003, 05:08 PM
#1
Registered User
Thread Starter
Join Date: Sep 2001
Location: St. Paul, MN USA
Posts: 190
Those that are using the Qwik Stick short shifter?
I make this product. I'm looking for feedback on it. What do you think of its performance/install/directions, and so on?
For those of you with a competing brand I'm just looking for info from people who own the Qwik Stick. Here is a link for SpeedSpecialty with the Qwik Stick. BTW, the bolts used for this are now hardened steel allen head bolts. The picture has the wrong bolts shown.
http://www.speedspecialty.com/store/...duct=QuikStick
For those of you with a competing brand I'm just looking for info from people who own the Qwik Stick. Here is a link for SpeedSpecialty with the Qwik Stick. BTW, the bolts used for this are now hardened steel allen head bolts. The picture has the wrong bolts shown.
http://www.speedspecialty.com/store/...duct=QuikStick
12-12-2003, 12:02 PM
#3
Registered User
Join Date: Jun 2003
Posts: 96
This is best mod for the buck I've ever done. I originally saw it in GMHTP magazine, and thought I'd give it a try. Now I never miss the 2-3 shift anymore. The quality was great. My friend has the Lous short stick, I went with the QS because it wasn't bent like the LSS, my buddy always catches the ashtray with Lous. I never do.
I put the Qwik Stick sticker on my tool box.
I put the Qwik Stick sticker on my tool box.
Last edited by XTZ; 12-12-2003 at 12:06 PM.
Thread
Thread Starter
Forum
Replies
Last Post
ducttape1975
New Member Introduction
2
07-10-2015 06:29 PM
PFYC
Supporting Vendor Group Purchases and Sales
0
04-16-2015 09:57 AM