stock cubes?
Registered User
Joined: Sep 1998
Posts: 8,319
From: US 1 Mile Marker 52 in the Florida Keys
Re: stock cubes?
there is the LSx based block that was put in the trucks...it's the 6.0L block.
most of the vendors sell them as stroker motors. 369s, 408s, 427s...
try
www.victoryracingengines.com
www.thunderracing.com
www.tbyrne.com
www.texas-speed.com
most of the vendors sell them as stroker motors. 369s, 408s, 427s...
try
www.victoryracingengines.com
www.thunderracing.com
www.tbyrne.com
www.texas-speed.com
Thread Starter
Registered User
Joined: Mar 2006
Posts: 158
From: Covington, Louisiana
Re: stock cubes?
true that, i was just curious if anyone ever did them
Actually I'm looking at the 408 iron block from TSP with PRC heads. Thier site claims 550+ rear wheel N/A and 800 on N2O. I would rather run an all motor with 550 rwhp, personal chioce thought
Actually I'm looking at the 408 iron block from TSP with PRC heads. Thier site claims 550+ rear wheel N/A and 800 on N2O. I would rather run an all motor with 550 rwhp, personal chioce thought
Last edited by MonkeyBoneSS; Mar 9, 2006 at 01:46 PM.
Retired
Joined: Oct 1999
Posts: 3,166
From: Inside Uranus
Re: stock cubes?
Originally Posted by MonkeyBoneSS
true that, i was just curious if anyone ever did them
Actually I'm looking at the 408 iron block from TSP with PRC heads. Thier site claims 550+ rear wheel N/A and 800 on N2O. I would rather run an all motor with 550 rwhp, personal chioce thought.
Actually I'm looking at the 408 iron block from TSP with PRC heads. Thier site claims 550+ rear wheel N/A and 800 on N2O. I would rather run an all motor with 550 rwhp, personal chioce thought.
Dude, I told you about 40000 times. Check out Futral Motorsports. They are about 30-40 minutes away and build the best **** around.
I went there the other day to pick up my Vette and they had an LS1 TA on the lift.... I asked Allan "WTF is in that thing?" He smiled and said "A 605 rwhp solid-roller 434ci LS1"
Mike
Thread Starter
Registered User
Joined: Mar 2006
Posts: 158
From: Covington, Louisiana
Re: stock cubes?
Holy **** that is one hell of a beast. One thing is it his daily driver, mine is and I am also sure he paid a pretty penny for that from them!
I have been there a few times and they do have a nice shop set up out there.
I have been there a few times and they do have a nice shop set up out there.
Last edited by MonkeyBoneSS; Mar 9, 2006 at 01:46 PM.
Registered User
Joined: Apr 2003
Posts: 4,507
From: FTW, TX
Re: stock cubes?
If you want aftermarket. There is the new warhawk LS based block.
http://gmhightechperformance.com/tech/0603htp_hawk/
454 Cui for 2k less than a C5R block. Its aluminum but will outperform any iron LS blocks.
http://gmhightechperformance.com/tech/0603htp_hawk/
454 Cui for 2k less than a C5R block. Its aluminum but will outperform any iron LS blocks.
Thread
Thread Starter
Forum
Replies
Last Post
dbusch22
Forced Induction
6
Oct 31, 2016 11:09 AM