Need advice on choosing plugs & wires
First off, I'm guessing I need NGK TR55's.. Seems to be the plug of choice. I don't blast my car every second I get--will they last awhile? 20-25,000 miles? Also, need a good set of wires, not too expensive though. Let me know what you guys think. THX
------------------
Mark
'01 WS6 T/A
M6, bone stock
------------------
Mark
'01 WS6 T/A
M6, bone stock
I use AC Delco Rapidfires.They last a good 36k and are GM spec.I also use Taylor 10.4mm race wires.The aftermarket wires like Taylor,MSD,and Accel are actually cheaper than stock wires.I paid $65 for my wires when Autozone wanted $95 for stockers.Good luck.
Kevin
------------------
1998 Black Z28 A4
-------1/8-------
8.584 @ 83.64 MPH
Pics
Camaro/Firebird Birthday Bash
Kevin
------------------
1998 Black Z28 A4
-------1/8-------
8.584 @ 83.64 MPH
Pics
Camaro/Firebird Birthday Bash
defintely recommend the Taylor 10mm wires, high quality and take up less room, easier to put on and take off than stock - which simplies work under the hood and future upgrade plans.
Putting long tube headers on my car made it easier to get to the plugs and wires. Easier maintenance! So use that as an excuse to go out and get yourself some LT headers!
------------------
'02 Z28 : MTI lid, TTS headers, Corsa exaust, ASP pulley, Pro5.0 w/Lou's ShortStick, Konis (front) Bilsteins (rear), 35mm ST swaybar, SS wheels, SLP SFCs, disabled DRLs, *all* the free mods! :NEXT: ported TB?, NAAAAWZ?? LS1edit???
Putting long tube headers on my car made it easier to get to the plugs and wires. Easier maintenance! So use that as an excuse to go out and get yourself some LT headers!
------------------
'02 Z28 : MTI lid, TTS headers, Corsa exaust, ASP pulley, Pro5.0 w/Lou's ShortStick, Konis (front) Bilsteins (rear), 35mm ST swaybar, SS wheels, SLP SFCs, disabled DRLs, *all* the free mods! :NEXT: ported TB?, NAAAAWZ?? LS1edit???
Thread
Thread Starter
Forum
Replies
Last Post
dbusch22
Forced Induction
6
Oct 31, 2016 11:09 AM



