LS1 Based Engine Tech LS1 / LS6 / LS2 / LS3 / LS7 Engine Tech

If I lower do I need Lower Control Arms?

Thread Tools
 
Search this Thread
 
Old Nov 29, 2002 | 02:26 AM
  #1  
therealmagyver's Avatar
Thread Starter
Registered User
 
Joined: Jun 2002
Posts: 502
From: Miami, FL USA
Question If I lower do I need Lower Control Arms?

Is it going to hurt me if I drop my car without putting LCAs? I imagine the LCAs are for more traction. The PanHard Rod I figure is something I most likely will need.
Old Nov 29, 2002 | 02:40 AM
  #2  
Freak's Avatar
Registered User
 
Joined: Nov 1999
Posts: 446
From: Lincoln Park, MI US
you shouldnt, though some people have had the rear end, end up not in the center of the wheel well, so adjustable LCA's were needed (if you want to bother) Mine is slightly off and havent gotten the ajustables yet, no problems.

you WILL need LCA relocation brackets, unless you like having no traction whatsoever.
Old Nov 29, 2002 | 03:05 AM
  #3  
redz_02's Avatar
Registered User
 
Joined: Oct 2001
Posts: 390
From: Corpus Christi, Texas, US
no, but you might need some LCA relocation brakets to put the LCA's lvl to the road.
Old Nov 29, 2002 | 02:54 PM
  #4  
Eric @ DMS's Avatar
Registered User
 
Joined: Feb 2002
Posts: 292
From: Dynamic Motorsports
You don't need LCAs to drop your car. LCAs and brackets are definitely good when wanting to eliminate wheel hop and increase traction.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
DarkKnight
Buyer/Seller Feedback
1
May 11, 2015 10:03 PM
DarkKnight
Buyer/Seller Feedback
8
May 4, 2015 03:32 PM
thenewkid
LT1 Based Engine Tech
4
Apr 12, 2015 07:42 PM
sseeya
Suspension, Chassis, and Brakes
1
Apr 9, 2015 06:38 AM
thenewkid
New Member Introduction
5
Nov 27, 2014 09:41 AM




All times are GMT -5. The time now is 01:52 PM.