Header Preference??
Thread Starter
Registered User
Joined: Mar 2000
Posts: 33
From: St. John, Indiana, USA
Header Preference??
I have a 98 WS6 and was thinking about getting headers for it. Does anyone have a preference of what to go wiht, or what to stay away from. I dont think i want to spend the money on borla. Mainly due to the fact that I have had 3 fbodys in 4 years.
I Want somethign to sound nice, give good performance.
------------------
1998 Trans Am WS6. M6
I Want somethign to sound nice, give good performance.
------------------
1998 Trans Am WS6. M6
Registered User
Joined: Mar 2002
Posts: 325
From: akron/canton, ohio
well lets start with the basics...long tubes are a must...if you dont get LT's, dont bother at all. on to brand name...personally, id stay away from SLP for sure...many may argue against that, but run a search on ls1.com and see how many threads you can find about problems with slp headers, then youll see. i personally recommend hookers because of the phenomenal price and the quality thats up there with the best. get them from jet-hot direct and you are set to go. other headers to look at...tts, flp, grotts (if you can find them). just alittle bio on the hookers...go in very easily, ground clearance is not an issue (even on a lowered car), and the y-pipe bangs very little and can be completely resolved easily. good luck on your decision.
------------------
1999 Camaro SS A4 Black/Black/Dark Gray w/ Torch Red Hood Scoop and Torch Red Rear Stripe... 3:23 || SLP Loudmouth || SLP AirBox Lid w/ K&N || SLP Bowtie Grille || SLP CAI || SLP SFC || SLP STB || AZP&S Adjustable Fuel Pressure Regulator w/ 3psi Boost || Sullivan Aluminum Racing Pedals || Yank ST3500 || B&M 24K Tranny Cooler || Jet-Hot Hooker LT Headers w/ ORY || Dual 3'' Summit Cutouts || Hypertech 160 T-Stat || SLP Fan Switch || MAF-Translator || 17 x 9.5 Aluminum Z06 Wheels || Nitto 555R's || Macewen White Faced Gauges w/ Red Dash Bulbs & White Shift Selector Overlays || Xenon Headlights.
Me <------- Saving EVERY PENNY from now (Aug. '02) until summer '03 to TURBOCHARGE the SS!!
------------------
1999 Camaro SS A4 Black/Black/Dark Gray w/ Torch Red Hood Scoop and Torch Red Rear Stripe... 3:23 || SLP Loudmouth || SLP AirBox Lid w/ K&N || SLP Bowtie Grille || SLP CAI || SLP SFC || SLP STB || AZP&S Adjustable Fuel Pressure Regulator w/ 3psi Boost || Sullivan Aluminum Racing Pedals || Yank ST3500 || B&M 24K Tranny Cooler || Jet-Hot Hooker LT Headers w/ ORY || Dual 3'' Summit Cutouts || Hypertech 160 T-Stat || SLP Fan Switch || MAF-Translator || 17 x 9.5 Aluminum Z06 Wheels || Nitto 555R's || Macewen White Faced Gauges w/ Red Dash Bulbs & White Shift Selector Overlays || Xenon Headlights.
Me <------- Saving EVERY PENNY from now (Aug. '02) until summer '03 to TURBOCHARGE the SS!!
Registered User
Joined: Dec 2001
Posts: 511
From: Soon to be Pensacola
Without question Hooker LTs.
There are very few, if any issues with this header compared to other brands. Doing a search on LS1.com will bring up quality issues with SLP and FLP, and customer service/availability issues with Grotts. TTS recieve praise, but few people have them and they are the most complex to install.
Jet hot has a super price on coated. If you want uncoated, they come cheaper but you have to go through Jegs or Summit to get the best price.
Dave
------------------
There are very few, if any issues with this header compared to other brands. Doing a search on LS1.com will bring up quality issues with SLP and FLP, and customer service/availability issues with Grotts. TTS recieve praise, but few people have them and they are the most complex to install.
Jet hot has a super price on coated. If you want uncoated, they come cheaper but you have to go through Jegs or Summit to get the best price.
Dave
------------------
Thread
Thread Starter
Forum
Replies
Last Post
94Z28LS1toLT1
General 1967-2002 F-Body Tech
8
Apr 7, 2015 05:37 AM
