Fuse Box/Programming help?
Fuse Box/Programming help?
I am trying to get my radio to work. I am getting power through my constant wire, but not through the ignition wire, which made me think it was in the fuses. The salvage company sent me everything I needed to fix the car, less the cover for the fuse box
When I turn the key back to ACC. I get 2 chimes, and my doorlock buttons, etc. make it chime more. Which makes me think the car is in programming mode. I've been reading on here, and the only way to get the car out of programming mode, is to put the radio fuse back in. Problem is, I don't know which fuse is the radio fuse. If anyone could try to explain were the radio fuse is, or has a picture of the diagram on the fuse block cover, it would be very much appreciated !
Thanks!
Logan Trueblood
When I turn the key back to ACC. I get 2 chimes, and my doorlock buttons, etc. make it chime more. Which makes me think the car is in programming mode. I've been reading on here, and the only way to get the car out of programming mode, is to put the radio fuse back in. Problem is, I don't know which fuse is the radio fuse. If anyone could try to explain were the radio fuse is, or has a picture of the diagram on the fuse block cover, it would be very much appreciated !Thanks!
Logan Trueblood
Thread
Thread Starter
Forum
Replies
Last Post
autoxr166
General 1967-2002 F-Body Tech
0
Sep 25, 2015 04:21 PM
Ryan Ramsaran
LT1 Based Engine Tech
3
Sep 19, 2015 08:43 PM
z28cam1993
General 1967-2002 F-Body Tech
14
Sep 9, 2015 04:08 AM



