Corvette FRC's

Reply Subscribe

Thread Tools

Search this Thread

Jul 21, 2003 | 12:26 AM

Mike94ZLT1

Thread Starter

Registered User

Joined: Oct 2000

Posts: 1,665

From: Livonia, Mi

Corvette FRC's

Hey, I just ordered a set of FRC's from Dal, I got them for a 99 C5. Did I order the right ones? What has to be modified to get them to fit? Thanks guys!

Jul 21, 2003 | 12:32 AM

ChrisLS1Bird

Registered User

Joined: Dec 1999

Posts: 303

Corvette Fixed Roof Coupes?

I just figured it out...fuel rail covers. In Corvette people lingo, FRC=Fixed Roof Coupe. It's a C5 hardtop. Is it common to abbreviate "fuel rail covers" like that? I had no idea what you were talking about.

Jul 21, 2003 | 01:27 AM

Ferocity02

Registered User

Joined: Feb 2003

Posts: 614

From: Auburn, California

You got the good ones. The newer ones will work too, but more cutting. Since all cars are made a little bit differently, you mofifications will differ from install guides and what not. You will need to cut to clear the AIR tubes, the oil dipstick, and the throttle cable plate.

Jul 21, 2003 | 04:11 PM

SSpdDmon

Registered User

Joined: May 2003

Posts: 1,747

From: Farmington, MI

Quote:

Originally posted by Ferocity02
You got the good ones. The newer ones will work too, but more cutting. Since all cars are made a little bit differently, you mofifications will differ from install guides and what not. You will need to cut to clear the AIR tubes, the oil dipstick, and the throttle cable plate.

You might need to cut the drivers side one as well for your 2nd fuel line. The last time I saw the setup on my dad's 99 Vette, he only had a single fuel line. I think 97 and maybe 98 Vettes ran dual fuel lines on the drivers side, but I'm not 100%.