Car shift 1st to 4th quickly after CAM install
08-11-2004, 07:48 AM
#1
Registered User
Thread Starter
Join Date: Nov 2003
Posts: 307
Car shift 1st to 4th quickly after CAM install
My buddy installed his 222/224 cam and now it shifts 1st to 4th within seconds . If he stomps on it, then it will run fine but he cant cruise off the line. He has been tuned by jeremy. He replaced his tps sensor and when he puts it on a scanner it shows .61 off the gas and when full throttle it shows .47. Also the scanner shows 100 percent throttle when he has it to the floor too. Everything checks out fine. Not sure whats going on.
Tim
Tim
08-11-2004, 02:09 PM
#3
Registered User
Join Date: Sep 2001
Posts: 223
Re: Car shift 1st to 4th quickly after CAM install
Originally Posted by 93redbird
My buddy installed his 222/224 cam and now it shifts 1st to 4th within seconds . If he stomps on it, then it will run fine but he cant cruise off the line. He has been tuned by jeremy. He replaced his tps sensor and when he puts it on a scanner it shows .61 off the gas and when full throttle it shows .47. Also the scanner shows 100 percent throttle when he has it to the floor too. Everything checks out fine. Not sure whats going on.
Tim
Tim
Thread
Thread Starter
Forum
Replies
Last Post
PFYC
Supporting Vendor Group Purchases and Sales
0
12-04-2014 11:56 AM
F(ast)-body
LT1 Based Engine Tech
8
02-26-2003 09:05 AM