LS1 Based Engine Tech LS1 / LS6 / LS2 / LS3 / LS7 Engine Tech

can't stop pinging..........HelP!

Thread Tools
 
Search this Thread
 
Old May 3, 2004 | 06:16 PM
  #1  
NZ12'S's Avatar
Thread Starter
Registered User
 
Joined: Nov 2000
Posts: 96
can't stop pinging..........HelP!

Hey Guys,
Going to the track Friday night, but it won't stop pinging at wot.
In California and the gas is only 91 octane (maybe). Changed the IAT, bypassed the tb coolant and don't have the hypertech programmed for power and put the screen back in the maf, still slight ping...most noticeable in second and third. Any idea and help would be appreciated!
ps don't won't to run any octane boost!
Old May 3, 2004 | 06:55 PM
  #2  
teke184's Avatar
Registered User
 
Joined: Sep 1998
Posts: 8,319
From: US 1 Mile Marker 52 in the Florida Keys
seafoam it, see if you can clean it up on the inside....
Old May 3, 2004 | 07:12 PM
  #3  
DARK AGE 53's Avatar
Registered User
 
Joined: Feb 2001
Posts: 257
From: MI.
Do you think you're getting much PCV oil blow-by, if so maybe a oil catch can will take care of your problem.

Al
Old May 3, 2004 | 11:40 PM
  #4  
blacknight's Avatar
Registered User
 
Joined: Aug 2002
Posts: 221
From: Mission Viejo, CA
Even though you put the tune back to stock there still is some of the Hypertech left in the pcm I'm pretty sure. Get the pcm reflashed. Might be carbon if your using lots of oil. If not these two then it's the horrible 91 here in Ca. I have kr and some pinging so my timing is a whopping 17 degree's.
Old May 3, 2004 | 11:51 PM
  #5  
NZ12'S's Avatar
Thread Starter
Registered User
 
Joined: Nov 2000
Posts: 96
thanks

thanks guys,
i'm going to do the seafoam tomorrow and put the catch can in wednesday. i'll get a little `100 octane for friday just incase
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
95z_28_camaro_4_Ivan
General 1967-2002 F-Body Tech
13
Oct 3, 2015 07:27 PM
4586
LT1 Based Engine Tech
8
Sep 27, 2015 01:55 PM
KYWes
LT1 Based Engine Tech
5
Sep 26, 2015 08:49 AM
mark0006
2010 - 2015 Camaro News, Sightings, Pictures, and Multimedia
0
Sep 14, 2015 12:35 PM
Aaront810
LT1 Based Engine Tech
1
Sep 11, 2015 11:24 AM




All times are GMT -5. The time now is 04:03 PM.