So for those who know, I mixed in the middle of a v6-v8 swap. It's been such a long path I began to lose interest. Welp... I haven't touched the car since April, and I realized I'm a FKING retard.

So I am going to wrap up this project.

Here is where I was stuck last... I had to change up some of the wire harnesses.

I HAD: a complete 1995 3.4L V6 set up....(now ripped out of the vehicle)
I HAVE:
1994 z28 Front harness (lights, fans, underhood fusebox)
Aug 93 (1994) Dash Harness out of a 3.4L
1994 Z28 engine harness.

Still won't run. **** last time I worked on it, I installed the headlight/fuse box harness and lost my regular lights, turn sigs, and rear tail lights. Turn the key and nothing.

So here are my options, keep the harnesses I have and look at them all day becasue I don't want to deal with them. Buy a prewired system, which would be a complete car set up, for all power options, from the front to the rear of a 1994 LT1. Or pay someone to work on it.

I had to remove an aftermarket remote start/ car alarm so this could be the key to the starting problem (ign.--> start wise). Anyone know how to install vehicle alarm systems who wants to make some $$?

Anyone have any suggestions of:

1. A person who is willing to mess with the wiring?
2. A good company to deal with to buy a complete wire harness from headlights to tail lights?
3. Any other thing that may help me lol!

I am located in NJ.

 

Bump for some help...

 

What PCM are you using?

 

It's a 1994 unit that was reprog by ion at MADZ28.com