how hard is it to replace the window motor and what all do i need?it's the driver side if thats helps any

 

It's not very hard, first time I replaced one it took an hour but I"m sure I can do another one in 30 min or less now. You will need a drill to drill out the rivits holding the old motor on and you will also have to drill through a piece of the door itself (don't worry about it looking bad the panel covers it after) It's a simple process, shoeboxs website has a write up on it but I don't know the link, a search would come up with the site.

 

http://shbox.com/page/windowmotor.html

Might not even have to drill the rivets if it's been replaced before.

 

i can only hope so

 

It's not hard to drill them out...and there's a good chance it has already been replaced, my passenger side motor only lasted about 20K before it died.

 

what exactly makes our window motors so sh!tty? mine go up then stop.... then i have to put it in park and then go back into drive for them to work.... my motors or wierd

 

Its really easy to do.. Just to let you know though, when you take the motor out the window falls down. I wasn't expecting that one (it was also 11 by the time I got the motor out) and had to catch it quick. Switching it out was a breeze.

 

Shoebox's sight RULEZ!

 

The window doesn't fall down if you follow my guide.