no brand elec cutout
10-26-2005, 08:43 PM
#1
Registered User
Thread Starter
Join Date: Sep 2004
Location: Kerrville, Texas
Posts: 635
no brand elec cutout
10-26-2005, 08:54 PM
#2
Registered User
Join Date: Jun 2000
Location: Marlton NJ
Posts: 2,414
Re: no brand elec cutout
truthfully, they all tend to break sooner or later. At least if you spend an extra few bucks on a DMH or something, you know it will be warrantyed. Do you think this guy is going to replace yours when it burns out in 6 months?
10-26-2005, 09:17 PM
#4
Registered User
Join Date: Jul 2001
Location: Jacksonville, FL
Posts: 1,655
Re: no brand elec cutout
I had a name brand one, butterfly leaked after a while, then broke the motor portion off on a hard launch (my fault, hit bottom of car) - now I uncap/cap mine manually. Was fun though. Get one with the best warranty.
10-26-2005, 10:38 PM
#6
Registered User
Thread Starter
Join Date: Sep 2004
Location: Kerrville, Texas
Posts: 635
Re: no brand elec cutout
Originally Posted by AW/whiteZ-28
Looks like they call it a 3 inch and use a 2.5 inch E-cutout with a 3 inch pipe reduced to fit it.
10-26-2005, 11:05 PM
#7
Registered User
Join Date: May 2001
Location: Ft. Worth,TX (NRH)
Posts: 3,498
Re: no brand elec cutout
Look at the picture, see the reducer (little piece of exhaust pipe) they reduce the 3 inch cutout (on the car) to a 2.5 (for the e-cutout) with that. The E-cutout is a 2.5 inch.
10-26-2005, 11:07 PM
#8
Registered User
Thread Starter
Join Date: Sep 2004
Location: Kerrville, Texas
Posts: 635
Re: no brand elec cutout
Originally Posted by AW/whiteZ-28
Look at the picture, see the reducer (little piece of exhaust pipe) they reduce the 3 inch cutout (on the car) to a 2.5 (for the e-cutout) with that. The E-cutout is a 2.5 inch.
10-27-2005, 09:53 AM
#11
Registered User
Join Date: Jun 2000
Location: Marlton NJ
Posts: 2,414
Re: no brand elec cutout
Originally Posted by TA-Body
who sells the DMH?
He's a Vendor here I believe, so you may be able to get it a little cheaper then the website lists, just post in the GP section.
11-08-2005, 02:20 PM
#12
Registered User
Thread Starter
Join Date: Sep 2004
Location: Kerrville, Texas
Posts: 635
Re: no brand elec cutout
I just purchased one from him.
in the video it shows liquids leaking from the cutout even though its closed...I hope that was an isolated incident.
I will let you guys know how it works when it gets in
in the video it shows liquids leaking from the cutout even though its closed...I hope that was an isolated incident.
I will let you guys know how it works when it gets in
11-08-2005, 04:33 PM
#13
Registered User
Join Date: Aug 2003
Location: Detroit
Posts: 2,926
Re: no brand elec cutout
Originally Posted by TA-Body
I just purchased one from him.
in the video it shows liquids leaking from the cutout even though its closed...I hope that was an isolated incident.
I will let you guys know how it works when it gets in
in the video it shows liquids leaking from the cutout even though its closed...I hope that was an isolated incident.
I will let you guys know how it works when it gets in
