no brand elec cutout
#1
no brand elec cutout
#2
Re: no brand elec cutout
truthfully, they all tend to break sooner or later. At least if you spend an extra few bucks on a DMH or something, you know it will be warrantyed. Do you think this guy is going to replace yours when it burns out in 6 months?
#4
Re: no brand elec cutout
I had a name brand one, butterfly leaked after a while, then broke the motor portion off on a hard launch (my fault, hit bottom of car) - now I uncap/cap mine manually. Was fun though. Get one with the best warranty.
#6
Re: no brand elec cutout
Originally Posted by AW/whiteZ-28
Looks like they call it a 3 inch and use a 2.5 inch E-cutout with a 3 inch pipe reduced to fit it.
#7
Re: no brand elec cutout
Look at the picture, see the reducer (little piece of exhaust pipe) they reduce the 3 inch cutout (on the car) to a 2.5 (for the e-cutout) with that. The E-cutout is a 2.5 inch.
#8
Re: no brand elec cutout
Originally Posted by AW/whiteZ-28
Look at the picture, see the reducer (little piece of exhaust pipe) they reduce the 3 inch cutout (on the car) to a 2.5 (for the e-cutout) with that. The E-cutout is a 2.5 inch.
#11
Re: no brand elec cutout
Originally Posted by TA-Body
who sells the DMH?
He's a Vendor here I believe, so you may be able to get it a little cheaper then the website lists, just post in the GP section.
#12
Re: no brand elec cutout
I just purchased one from him.
in the video it shows liquids leaking from the cutout even though its closed...I hope that was an isolated incident.
I will let you guys know how it works when it gets in
in the video it shows liquids leaking from the cutout even though its closed...I hope that was an isolated incident.
I will let you guys know how it works when it gets in
#13
Re: no brand elec cutout
Originally Posted by TA-Body
I just purchased one from him.
in the video it shows liquids leaking from the cutout even though its closed...I hope that was an isolated incident.
I will let you guys know how it works when it gets in
in the video it shows liquids leaking from the cutout even though its closed...I hope that was an isolated incident.
I will let you guys know how it works when it gets in