General 1967-2002 F-Body Tech For general F-Body discussion that does not fit in any other forum.
For F-Body Technical/Information Discussion ONLY

Looking for help/advice.

Thread Tools
 
Search this Thread
 
Old Oct 13, 2005 | 06:01 PM
  #1  
musclecar's Avatar
Thread Starter
Registered User
 
Joined: Sep 2004
Posts: 60
From: O'fallon, MO
Looking for help/advice.

I am considering swapping a complete 2000 dash into my 95 Z28. What issues/problems will I run into? Will everything still work correctly? How does the digital odometer work as opposed to the regular number wheel one? Thank you for any help/advice that you can give me.
Old Oct 13, 2005 | 06:02 PM
  #2  
Blue89Bird's Avatar
Registered User
 
Joined: Jun 2000
Posts: 2,413
From: Marlton NJ
Re: Looking for help/advice.

do a search for dash swap, this has been covered in GREAT detail not too long ago.
Old Oct 13, 2005 | 10:10 PM
  #3  
irockitz28's Avatar
Registered User
 
Joined: Oct 2005
Posts: 2
From: FLORIDA
Question Re: Looking for help/advice.

just woundering if any one could give me a little info. ok i have a 85 irockz28. and it has a 350 block bord 20 over and it has forged dome pistons .and high performance rings and lifters and push rods. ok plus "305 heads shaved .20000's'' . i have a 700 R4 tranny with a police interceptor govner stall converter and a shift kit as well.and i forgot the motor has a 3/4 cam in it as well. im tryin to find out what kind of horse power i may have under the hood. i havent been able to go have a dinogstics test ran yet. so if any one can help me out here i would be very thankful.

Last edited by irockitz28; Oct 13, 2005 at 10:23 PM. Reason: adding to and correcting mispelled words
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
SmokeyZ
Drivetrain
13
Oct 22, 2009 06:55 PM
jdub4105
Drivetrain
2
Apr 29, 2008 05:29 PM
wallacehat
Forced Induction
5
Sep 29, 2006 11:46 PM
Green95Z28
Classic Engine Tech
5
May 30, 2005 04:42 PM
jp2002ls1
Midwest
0
Mar 13, 2005 09:19 PM




All times are GMT -5. The time now is 04:35 AM.