Does anyone know which idler pulley is proper for a 1995 Camaro Z28 with AC?

Seems there are 82mm ODs which often say without AC and then there is a 76mm version which doesn't specify. It also appears that the same pulley OD is for either V6 or V8.

The bearing appears consistant across many manufacturers as a
6203 DDU Ball Bearing 17x40x12 mm deep groove ball bearing.

Thanks,

Stephen

 

With A/C there is only a tensioner pulley. Is that what you are asking about? Or are you asking about the "A/C Delete Pulley"?

Shoebox's part list indicates these part #:

1993-1997 belt tensioner 12552509

a/c delete pulley 10115875

Both part #'s are still available.

 

I'll go with the option of not buying the part that does not go on the car then!

Just the tensioner device with the pulley for me.

Just too tired to think straight after going through all the hoses for the cooling and heating system.

Thanks for setting me straight.

Stephen

 

Do you know anywhere online that still sells the GM a/c delete pulley?

Thanks!

 

https://www.summitracing.com/parts/nal-10115875

https://paceperformance.com/i-513371...ompressor.html

Buy GM 10115875 Pulley, genuine OEM part

If it truly is "discontinued", the Summit link has a link to a Dorman replacement at much lower cost.

 

Thanks Injuneer -

I was hoping to find a pulley where I didn't have to drill or use washers - but looks like I may just have to go with the Dorman