General 1967-2002 F-Body Tech For general F-Body discussion that does not fit in any other forum.
For F-Body Technical/Information Discussion ONLY

8.74 in the 1/8th 2.1 60'@82 mph?????

Thread Tools
 
Search this Thread
 
Old Mar 7, 2006 | 06:44 PM
  #1  
redington's Avatar
Thread Starter
Registered User
 
Joined: Jul 2005
Posts: 162
8.74 in the 1/8th 2.1 60'@82 mph?????

hey guys just curious but does that sound right? i didnt run it someone else said they did it just kinda sounded bs to me.

it was a guy in a 96 cobra said he ran an 8.74 in the 1/8 on street tires a 2.1 60' @82 mph "with the IMRC wigged out on the car"

oh by the way his car is stockjust sounded odd for a cobra to run like that

-mike
Old Mar 7, 2006 | 06:53 PM
  #2  
RacingTiger04's Avatar
Registered User
 
Joined: Jul 2004
Posts: 1,108
From: Jasper, TN
Re: 8.74 in the 1/8th 2.1 60'@82 mph?????

Originally Posted by redington
hey guys just curious but does that sound right? i didnt run it someone else said they did it just kinda sounded bs to me.

it was a guy in a 96 cobra said he ran an 8.74 in the 1/8 on street tires a 2.1 60' @82 mph "with the IMRC wigged out on the car"

oh by the way his car is stockjust sounded odd for a cobra to run like that

-mike
sounds about right, ive seen stock cobras around here running 8.6 and some 03s pulling 8.3. and my car runs about an 8.9 as screwed up as it is lol
Old Mar 7, 2006 | 07:39 PM
  #3  
FastZinTennessee's Avatar
Registered User
 
Joined: Mar 2001
Posts: 2,521
From: Costa Mesa, CA
Re: 8.74 in the 1/8th 2.1 60'@82 mph?????

That time sounds believable to me.
Old Mar 7, 2006 | 10:51 PM
  #4  
Jeremy95TA's Avatar
Registered User
 
Joined: Jan 2005
Posts: 282
Re: 8.74 in the 1/8th 2.1 60'@82 mph?????

Sounds about right to me as well.
Old Mar 8, 2006 | 01:29 AM
  #5  
LT1 POWR's Avatar
Registered User
 
Joined: Apr 2005
Posts: 1,830
From: Colorado Springs, CO
Re: 8.74 in the 1/8th 2.1 60'@82 mph?????

Sounds to fast to me. My brother in law had a 96 Corba with catless x-pipe, flowmasters, intake and some other mods(sounded mean as **** btw). And the best he could pull off was a 9.2 at ??mph. This was in Iowa so maybe in a lower elevation he might be able to pull off a better et. I never got to race him before he sold it.
Old Mar 8, 2006 | 09:02 AM
  #6  
redington's Avatar
Thread Starter
Registered User
 
Joined: Jul 2005
Posts: 162
Re: 8.74 in the 1/8th 2.1 60'@82 mph?????

he claims he ran a 13.0 in the 1/4 also on a stock cobra and a 12.5 on n20 100 shot.... it just doesnt seem right to me ..... maybe he is .... i will have to get my car fixed and find out whos is faster.
Old Mar 8, 2006 | 10:23 AM
  #7  
RealQuick's Avatar
Registered User
 
Joined: Feb 2002
Posts: 5,645
From: Bridgewater, MA
Re: 8.74 in the 1/8th 2.1 60'@82 mph?????

Seems a bit quick for a DOHC N/A stock cobra. That would translate into a 13.3 @ 104mph

When I had full bolt-ons I ran 8.699 (~8.7) @ 83.5mph w/2.1 60' which resulted in a 13.3 @ 105.8mph. I raced my buddy's cobra (97' with catback, CAI, timing adjuster and shifter) and he ran 14.0x @ 102 w/2.3 60'. It ended up being like 4-5 carlengths. He was modded and despite a bad 60' only trapped 102mph (81mph in the 1/8th).

Either your guy is bsing you or he can drive the hell out of a freak mustang. BTW, all my runs against my friend were at sea level @ NEw England Dragway. I have heard thta Evan Smith and some mustang guys have run mid 13's witha 96-98, but nobody has come close to a "13.0" stock. I dont think I have even seen them break into the 13's stock at my track to be honest. Doesnt mean it dosnt happen, but a 13.8-13.9 is alot slower than a 13.0.
Old Mar 8, 2006 | 10:48 AM
  #8  
CANTONRACER's Avatar
Registered User
 
Joined: Jun 2000
Posts: 1,764
From: North Canton, OH
Re: 8.74 in the 1/8th 2.1 60'@82 mph?????

They all say crap like that.

That car might be lucky to run 9.2's in the 1/8@78 mph.
Old Mar 9, 2006 | 06:35 AM
  #9  
trymy6's Avatar
Registered User
 
Joined: Jan 2004
Posts: 66
Re: 8.74 in the 1/8th 2.1 60'@82 mph?????

et sounds about right. MPH seems a little high for a stock'96. but if he was spinning hard that may make his traps a little higher, as weird as that may sound.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
95chwagon
Parts For Sale
5
Oct 16, 2015 12:24 PM
4586
LT1 Based Engine Tech
8
Sep 27, 2015 01:55 PM
MDZ28
Computer Diagnostics and Tuning
11
Sep 24, 2015 09:15 AM
NewsBot
2010 - 2015 Camaro News, Sightings, Pictures, and Multimedia
0
Sep 14, 2015 09:20 AM
mmf_1013
General 1967-2002 F-Body Tech
0
Sep 12, 2015 08:56 PM




All times are GMT -5. The time now is 05:02 AM.