Has anyone who has installed an MSD Opti run into the problem of installing the fresh air line into an aftermarket intake elbow.Since they tell you to drill a hole into the rubber and mine is aluminum not sure how to go about this.

 

Drill a hole in the aluminum, tap threads into it, screw a thread-in nipple into the hole and attach the hose to the nipple. Or, drill a hole in the aluminum, put a rubber grommet in the hole, and get a plastic elbow similar to the stock blue piece, and push it into the grommet.

 

Sounds like I will drill, tap and screw the nipple into the hole. Thanks for the help