since im rebuilding my headers, i thought ide redesign the setup, and it would be just as easy to rebuild everything than to cut and and modify the existing stuff, so im selling the whole setup, headers to y pipe.

1 5/8 16 guage headers, 1/2 in. flange, t4 turbo flanges, 3/8 in., and 35/38mm turbosmart/deltagate wastegate flanges. two 3 inch downpipes that go to the 3 inch y pipe, that will hook into and catback. all use stainless vband clamps, a total of 5 clamps. cold side is 2.5 inch from the turbos, where it Ys into single 3 inch into the intercooler, and from the intercooler back to the intake is all 3 inch. i am also including the turbosmart plumb back BOV for that stealth approach.

what you will need:
two T4 turbos
silicone couplers (im keeping mine)
OBX or XSpower 24x12x4 intercooler
two wastegates, either turbosmart 38mm or deltagates, im sure there are more with the same footprint
and a welder, the headers leak around the collectors and around the head flange and WILL need to be fixed

feel free to ask for any questions, this setup requires relocation of the radiator, im not sure that it will require complete removal of the upper core support like i have done, you can probably get away with just trimming the upper core support so the radiator sits flush with the backside. should support about 1500 HP at the flywheel

now, for the price, since the headers need some work, and everything is just painted, not powder coated, or ceramic coated...im asking $1000 obo...i am alittle negotiable, but please dont insult me, i know its not the best, but a lot of time and money has gone into this kit, and it will perform very well

 

did u get my pm

 

nope, sorry my box was full...empty now