imgoing to be drawing oil from here. and i just want to make sure that a 4AN x 1/8 NPT fitting is what i should be looking at for threading itno it. i havent gotten it out yet as im still waiting on my parts *ofi....*. soo will that fitting just go right in in-place of the bolt??

 

1/8" NPT is right, the other end depends on the hose you're attaching to it. -4AN if you have a -4AN hose.

 

so a 1/8NPT X *what ever turbo feed line is* will work

*its a 94 lt1, *

 

thats what i am using

 

1/8 NPT is correct. That port sits in a sort of dimple in the block. You may want to use a short 1/8 pipe nipple and a female 1/8 NPT - AN fitting to stand it out from the depression. It can be difficult to get a wrench on things if you don't.